Showing all 20 results
-
![BCM End Plate Laying Flat]()
BCM QD End Plate – AR15 QD Receiver Sling Mount
$19.99The genuine BCM QD End Plate — a steel AR15 receiver end plate with a built-in QD socket, so the back of your rifle gets a clean rear sling point. Swaps in at the castle nut, staking-ready.
- Genuine BCM, steel, made in the USA
- Built-in QD socket for a rear sling attachment point
- Replaces the standard AR15/M4 carbine end plate
- Accommodates staking for a permanent install
- Needs a push-button QD swivel (add ours to complete it)
-
Sale! -10%
![]()
Holosun IRIS-GR3 – Green Laser, IR Laser & Illuminator
Original price was: $999.99.$899.99Current price is: $899.99.The Holosun IRIS-GR3 — the green-laser version of Holosun’s triple-function laser system. A visible green aiming laser, an IR aiming laser, and a 60mW IR VCSEL illuminator in one compact, rail-mounted unit. Zero in daylight with the green laser, run IR under night vision.
- Green version (GR3) — 520nm visible green laser, bright in daylight
- IR aiming laser + 60mW IR VCSEL illuminator for night vision
- Co-aligned lasers: zero in daylight, transition to IR at night
- 7075-T6 aluminum, IPX8 waterproof, Picatinny mount, CR123A
- Genuine Holosun, authorized dealer
-
![]()
Low Profile Ear Muffs – Walker’s Razor Slim Electronic
$69.99Low profile ear muffs built for people who actually shoot. The Walker’s Razor Slim sits thin against your head so it clears your cheek weld, gives you 23 NRR of protection, and amplifies what’s going on around you.
- NRR 23 — real protection from the blast
- Electronic: amplifies range commands and conversation, auto-cuts on the shot
- Ultra-low-profile cups clear your rifle stock
- Folds down, runs on 2 AAA (included)
- We stock these, sell them at shows, and run them at the range
-
![]()
M-LOK Sling Mount – Magpul Paraclip Sling Attachment
$19.99The genuine Magpul M-LOK sling mount — bolts to any M-LOK slot for a low-profile, clip-in sling point up front. Works with the Magpul Paraclip or a standard HK-style hook, so you may not need to buy anything extra.
- Genuine Magpul M-LOK Paraclip Sling Mount (MAG607), made in the USA
- Mounts to any M-LOK slot; includes all hardware
- Clip-in point — works with the Paraclip or an HK-style hook
- Angled, low-profile — stays clear of your optic, won’t snag
- ~1 oz, precision cast steel with QPQ nitride finish
-
![]()
Picatinny Sling Mount – Magpul RSA Rail Sling Attachment
$29.99The genuine Magpul RSA — a low-profile Picatinny sling mount that adds a forward sling point to any 1913 rail. Bolts into a rail slot, takes a clip-in sling, and stays out of your optic.
- Genuine Magpul RSA (MAG502), steel, made in the USA
- Mounts to any 1913 Picatinny rail
- Forward attachment point for clip-in slings (HK-style hook, Paraclip)
- Low-profile — won’t block your optic or snag gear
- ~1.3 oz, stress-tested past 300 lbs
-
![Walker Slim Hearing Protection Kit.]()
This product has multiple variants. The options may be chosen on the product pageWalker Range Kit – Complete Shooting Ear Protection Kit
$97.00Everything for a range day in one box — genuine Walker’s Razor Slim electronic muffs, our Ear Pro Cover, and a matching Key Keeper, all in one color, ready to run.
- Walker’s Razor Slim electronic muffs — hear range commands, block the gunfire
- Our Ear Pro Cover — padding, patch panels, protects the muffs
- Matching Key Keeper — clips your ear pro to your belt or bag
- Black or Coyote Brown — fully color-matched
- USA-made cover + keeper, lifetime warranty
-
![]()
Walkie Talkie Ear Muffs Attachment – Walker’s Razor
$49.99A two-way radio that clips right onto your Walker’s Razor muffs — talk and listen hands-free while your hearing stays protected. No handheld radio, no lifting a cup.
- Clips onto Walker’s Razor-series muffs
- Up to 3-mile range on a clear line of sight
- 22 channels, 99 sub-channels
- Push-to-talk or voice-activated (VOX) hands-free
- Runs on 3 AAA (included), ~12-hour life
-
![Quick Disconnect from the rear, button]()
QD Sling Attachment Point – Quick Detach Push Button Swivel
$19.99The QD sling attachment point that snaps your sling to any standard quick-detach socket — push in, hold tight, press to release. USA-made, pull-tested past 450 lbs, sold as a single.
- Push-button quick detach, fits standard QD sockets
- Recessed flush button won’t snag or release by accident
- Pull-tested to over 450 lbs, made in the USA
- Fits 1-1/4″ sling webbing
- Sold individually — buy one, not a pair
-
![]()
AR-15 Magazine Holder – Kydex Open-Top 5.56 Mag Carrier
$29.99A .080-inch Kydex AR-15 magazine holder with an open-top design for a fast, clean draw and adjustable set-screw retention. Short Malice Clips mount it to any belt or MOLLE / PALS gear. Fits all standard 5.56/.223 AR-15 mags — PMAG, USGI, and STANAG-pattern. Made in house in the USA.
-
![Bondo Convertible Sling Attached Two Point]()
This product has multiple variants. The options may be chosen on the product pageBondo Convertible Rifle Sling – 2-to-1 Point
Price range: $79.99 through $89.99One sling, two setups. The Bondo is a convertible rifle sling that switches from two-point to single-point in seconds — no tools, without taking it off your gun. Run it two-point for stability, drop it to single-point for speed, your call on the fly. Made in the USA from 1″ mil-spec nylon, with an internal comfort shock cord and an HK-style hook that mounts to any long gun. Backed by our lifetime warranty.
See it in action:
-
![Headband Cover on Walker Razor Slims]()
This product has multiple variants. The options may be chosen on the product pageHeadband Cover for Headphones & Ear Pro
Price range: $34.99 through $39.99A bare plastic headband is a pressure point after an hour — and it’s wearing out while you ignore it. This headband cover fixes both: it pads where the band meets your head and protects the band underneath.
- Universal fit — works with most ear muffs and many gaming headsets
- Patch panels top and sides, standard on every cover
- Padded bottom holds muffs steady on smaller heads
- Rear admin loop clips to a Key Keeper
- Cordura, USA-made, lifetime warranty
-
![Key Keeper Surround be Hearing Protection, Gloves and Keys.]()
This product has multiple variants. The options may be chosen on the product pageKey Keeper – Heavy-Duty Key Holder for Belt & MOLLE
$19.99
Keys on the tailgate, gloves in the bay — the gear that isn’t attached to you is the gear that walks off. The Key Keeper wraps your belt or MOLLE and keeps it on you.
- Wraps any belt up to 2″ — duty belt, work belt, or EDC
- MOLLE compatible, clips to standard webbing
- Steel snap hook with a gate holds keys, gloves, a fob
- 1″ webbing, 1,000-lb breaking strength, US-mill materials
- Hand-sewn in Idaho — lifetime warranty
-
![]()
This product has multiple variants. The options may be chosen on the product pageConcealed Carry Gun Belt – Low-Profile 1.5″ Nylon CCW Belt
$49.99Carries concealed, wears like a regular belt. The Sturdy Gun Belt (SGB) is a low-profile 1.5″ nylon concealed carry gun belt — stiff enough to support a holstered handgun, low-profile enough to disappear under a shirt. It runs through standard belt loops, supports an OWB holster with accessories, and doubles as a clean everyday carry belt. Made in the USA with a no-metal Duraflex buckle, backed by our lifetime warranty. Order by your pant size.
-
![]()
Grizzly Shield Patch
$9.99Be the talk of the town and up your game with a shake of sexy with our first Moral Patch! You’re almost guaranteed to gain some extra wanted attention when walking around with this attached to your hat, shirt, backpack, and or face (what ever works for you – you don’t know).
-
![HK Clip With Black Shroud]()
This product has multiple variants. The options may be chosen on the product pageHK Clip – HK-Style Sling Hook With Noise-Killing Shroud
$5.99The universal HK-style sling hook — a fast clip-in attachment point that hooks to the swivel, ring, or loop on almost any rifle. Ours ships with a 2-inch shroud that kills the metal-on-metal rattle and locks the clasp shut. Threads onto 1-inch sling webbing. The hook is black steel; choose a Black or Coyote shroud.
-
![P90 / PS90 Harness and Sling Installed]()
This product has multiple variants. The options may be chosen on the product pageP90 Sling Harness – Fits FN PS90 | Single-Point, USA-Made
Price range: $29.99 through $149.99Finally, a sling that actually fits the P90. This single-point harness is built specifically for the FN P90 and PS90 — it wraps the bullpup and gives you a clean single-point connection, no adapters or workarounds. Made in the USA from 1″ milspec nylon, fully ambidextrous, and it fits most airsoft P90 replicas too. Pair it with our Bondo Sling for the complete setup.
The Dominant Hand selection is optional, default is set to right handed for the buckle placement. While the harness is ambidextrous, a left handed person would prefer the buckle placement to be opposite of a right handed person. This makes the threading of the fabric through the stock easier and directly mirrors the setup in the video below.
Add a Magpul RSA to your order for a two point attachment. The Sling can do both. See it in action:
